link list

baby item list [1] [2] [3,4] [6,7] [8] | 小海马帮宝宝睡觉 | 佳能单反T1i/T2i/T3i 尼康单反促销 |
玩具 Toy Guide (0-1岁) (1-3岁) | pampers code | 婴儿用品实用总结: [1] [2] [3] [4] [5] [6] [7] [8] [9] |
孕期体重增加率、及饮食控制 [1] [2,3] [4] | 各年龄段推荐书目 [1] [2]
介绍一下各种 puzzles [1] [2] | 免费打印50张照片(4X6)

爹妈对于小娃,一定要有神统治人的态度。。。首先我们做神的,跟你一个做人的,别着较劲,那是不够艺术的。其次,我们做神的,人类的什么毛病没见过,不要大惊小怪,要常怀恕道。这两条之后才容易履行我们作为神的责任,去引导教育,和回应他们人类。。。要拿出神的智慧,一定要比娃高明。

热水器跳闸问题解决方法


发信人: Clearmind (Clearmind), 信区: Living
标 题: 我的热水器跳闸问题解决方法
发信站: BBS 未名空间站 (Sun Jan 18 10:20:45 2009)

记得前不久看到有人问到这个问题(三五天跳闸一次),其实我也有同样问题,只是不
得其解。不过最近我的热水时断时续,加热所需时间非常的长,所以还是决定修理一下
热水器。首先想到的是冲洗热水器。做了一次,看到一些浑浊物。重新使用后,老问题
还是没有解决。于是得出结论很可能加热丝坏了(我的是上下双加热丝的)。用电表一
量,果然发现加热丝的电阻远远大于正常电阻。而且上下加热丝的电压也不正常。正常
情况下,应该是一个240伏,一个0伏。但我的情况是一个240伏,一个120伏。所以,不
排除温度控制器也有问题。于是到HomeDepot花了38刀买了一个套件(加热丝和温度空
器)以及一个专用的装卸加热丝的工具。重新放水,卸加热丝,装上新加热丝。懒得换
旧的温控器,所以想看看它们到底坏了没有。重新使用,一切正常。而且跳闸问题也解
决了。

------------------------------------------------------------------------------

发信人: Clearmind (Clearmind), 信区: Living
标 题: Re: 我的热水器跳闸问题解决方法
发信站: BBS 未名空间站 (Mon Jan 19 14:10:49 2009)

You are right. Below please find the procedure, and hopefully that can be
helpful.

A.O. Smith ProMax Water Heater Repair Procedure

1. Turn off water heater power (through breaker box)

2. Open upper and lower heater control panels

3. Disconnect wires at A, B, C, and D. Measure the resistance between A and
B, and C and D. The resistance should be around 10-20 Ohms. (When power is
on and wires are connected, the top two wires in the top panel should be 240
V, and the voltage between A and B, and C and D should have at most one
pair with 240 V when heating is going on).

4. If the measurements is way different from the above normal values, in my
case thousands of Ohms, proceed

5. Drain all the water

6. Use standard heater element wrench to unscrew heating elements where A, B
, C, and D reside (Use long screw driver through the holes of the wrench for
better leverage. My broken elements are also shown)

7. Put one new heating elements and use the wrench to secure them to avoid
water leakage

8. Connect wires, add full water, resume power (Can remeasure voltage and
resistance for sure), and finally recover the panel

9. Enjoy fast hot water and no hassles for the frequently tripped water
heater breaker


【 在 claireliu (流水) 的大作中提到: 】
: 希望下回拍个录像,造福大家.



--

※ 来源:·WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn·[FROM: 68.55.]


此主题相关图片如下:

1.jpg
(53231 字节) [删除]

此主题相关图片如下:
2.jpg
(92560 字节) [删除]

此主题相关图片如下:
3.jpg
(74101 字节) [删除]

此主题相关图片如下:
4.jpg
(95809 字节) [删除]

此主题相关图片如下:
5.jpg
(114738 字节) [删除]

此主题相关图片如下:
6.jpg
(122245 字节) [删除]

No comments:

Post a Comment